2.54mm Pitch 2 Pin Through Hole Connector Assembled For Household

Specifications:

1) Poles: 2-24

2) Pitch: 2.54mm

3) Applicable wire: AWG #28 - #22
4) Applicable PC board thickness: 1.2mm~1.6mm 
5) Temperature range: -25 ~ +85C 
6) Rated voltage: 300VAC/DC
7) Rated current: 3.0A

8) Connect resistance: 0.02
9) Insulation resistance: 1,000m
10) Voltage withstanding capability: 1,000V AC/min
11) Material:
a) Housing: nylon UL940v-0
b) Terminal: phos bronze, tin / plated

c)Wafer: nylon UL940-0

Key Information :

Key feature

• Post to withstand 13 newtons (3 LBS) min. Axial force in both directions shown without dislodging.
• Tolerances apply to solder side of board.
• Measured at surface A
• Plastic flash permitted in this area.
• Parts comply with AMP solderablity SPEC.NO. 109-11-2
• One hole may be undersized (032-035 DIA) For assembly retention during wave soldering.
• Material: header-thermoplastic polyester

UL94V-O (Natural)

Post-copper alloy (tin-plated)

• Coordinate dimension applies from center of actual feature.
• Plastic burrs caused by cut-off tolling are permitted within the maximum tolerance envelope.
• Posts to be measured when strip is held flat
• Posts musts withstand two 90° bends against extrusion without breaking.
• Dimension should be .130 MIN when mating with A MTA 100 connector assembly or A CST 100